×
高级产品搜索菜单
EZConvert MB703M2P-B
M.2 SATA SSD to 2.5" SATA SSD Converter Adapter
产品详细信息
  • Enable Hot-Swap
    Because M.2 SSDs are not designed to be hot-swapped, their connectors are very delicate, typically rated for only 250 insertion/removal cycles. When used with the EZConvert MB703M2P-B, M.2 SATA SSDs can be hot-swapped without putting any wear on the internal connector, instead using ICY DOCK's strong hot-swap connector rated for 10,000 insertion/removal cycles. Hot-swap makes it easy to add, remove, and replace drives without the need to restart the system.
  • Perfect Compatibility
    EZConvert MB703M2P-B accepts any 30mm-80mm M.2 SATA SSD and gives it the exact same dimensions, port locations, and screw-hole locations as a standard 9.5mm 2.5" SSD.
  • The Adjustable M.2 Locker
    The adjustable M.2 locker slides to accommodate all standard M.2 SATA SSD lengths, including 2230 (30mm), 2242 (42mm), 2260 (60mm), and 2280 (80mm). The locker clips into the SSDs screw hole to secure the drive without the need for screws or tools.
  • Built to Last
    MB703M2P-B's body and lid each use a 1-peice design, constructed from a single piece of strong ABS plastic, to strengthen the enclosure and give your drive a physical layer of protection against drops and bumps. One-piece construction is preferred over multiple pieces, as the connection between two pieces creates a weak point that is prone to failure.
常见问题
  • QMy M.2 is not detecting
    Make sure that the cables are firmly connected to the device. If problem persists, try to connect the M.2 drive alone without the device
  • QHow do I change M.2 drives?
    By sliding the M.2 adjustable locker to release the M.2 drive from the device and pull the M.2 away from the connector to remove from the device.
产品评论
By: ServeTheHome - William Harmon
Again from Icy Dock, we have another useful product with the EZConvert MB703M2P-B. Whether you have extra M.2 SATA drives laying around that you want to use, simply need to convert a M.2 SSD from a laptop or another device for imaging, or have run out of M.2 SATA ports on your motherboard the EZConvert MB703M2P-B can fill your needs by installing these drives in a standard 2.5” drive bay. These can also be used in servers with 2.5” bays without issues 阅读更多信息
By: HWHound - Brendan Van Varik
While we are on the topic of packaging, let’s take a moment to get familiar with the M.2 SATA to 2.5″ SATA converter. The specific model number relating to this product is MB703M2P-B. The front and back of the box convey a lot of information regarding the product, similar to the dock above; and have some curb appeal to go with it. 阅读更多信息
By: ServeTheHome - William Harmon
The ToughArmor MB699VP-B will only take one 5.25” device bay and handles the bulky cables and extra power cables that U.2 NVMe SSD’s require with ease. Many of our workstation cases and a handful of server cases have 5.25” device bays that often go unused; this makes 阅读更多信息
高级产品搜索菜单
提交 取消
找不到合适的产品?提交您的请求HERE
在线零售商